- 22 -
© 2015 Suzo-Happ
2.10.
Path Switch - BBS-0110
The path switch routes the banknotes to the appropriate destination.
Banknotes are routed:
from validating head to any recycling cassette or cash collection system
from any recycling cassette to dispensing cassette or cash collection system
no other routings are supported
2.10.1.
Removing Path Switch
Remove the chassis from the housing (please see section above)
Open the chassis
Pull the tab and rotate the bearing 90 degrees,
Repeat the action with the second bearing at the opposite side of the chassis
Once both bearings have been released, carefully pull out the path switch from
the chassis.
3. Remove the Path Switch
2. Rotate the
bearing 90°
1. Pull the tab
Before placing the switch back in the chassis, make sure the gears on the switch and
chassis are aligned. Lock the tabs back in position.
