Set-up
Technical Handbook
019722-101 Rev. 05
37
SC-350/360
Setting password
After entering the password menu:
a) Enter the three digit password using
ACC
,
B
and
C
.
b) Press
Start/Stop
.
c) The display shows “ConFIr”.
d) The password must be confirmed by re-entering it with
ACC
,
B
and
C
.
e) Press and hold
Start/Stop
after entering the password.
– If the password was entered correctly the display shows
“PASS”.
– If the password was not entered correctly the display shows
“FAIL” . No change of password will be stored.
f) Release
Start/Stop
.
Disabling password
Set the password to zero (000), as described above.
Exiting the password menu
a) Press and hold
Start/Stop
.
– If no password is set, the display shows “noPASS”. Release
Start/Stop
. The machine returns to normal operating
mode after a few seconds.
– If a password is set, the display shows “ConFIr”. Release
Start/Stop
.
b) Confirm the password by re-entering it with
ACC
,
B
and
C
.
c) Press and hold
Start/Stop
after entering the password.
– If the password was entered correctly the display shows
“PASS”. Returns to normal operating mode.
– If the password was not entered correctly the display shows
“FAIL”. The password menu is not exited.
d) Release
Start/Stop
.
