Set-up
Technical Handbook
019722-101 Rev. 05
36
SC-350/360
7.14 Password Menu
By using a password, it is possible to protect the set-up, the master
reset and the service interval menu.
Selection of password
It is possible to protect different functions by selecting a password:
Note!
To avoid problems with passwords, it is recommended that each
country has its own password for all SC-350/360.
Entering password menu
a) Press and hold
Q
,
ACC
and
C
while switching
On
the machine.
b) When the display changes from showing “888888“, release
Q
,
ACC
and
C
.
– If the display shows “P. 000” no password is set.
– If the display shows “P. - - -” a password is required.
c) Enter the password by pressing the three keys
ACC
,
B
and
C
.
d) Press and hold
Start/Stop
after entering the password.
– If the password was entered correctly the display shows
“PASS”.
– If the password was not entered correctly the display shows
“FAIL”. Returns to normal operating mode.
e) Release
Start/Stop
.
Note!
If the machine does not accept the programmed password or if
password “909” is displayed, the CPU board is damaged and needs
service.
Password
Description
000
No password is set (default)
001-499
Protection of service interval
500-999
Protection of set-up, master reset and service interval
909
Corrupted password
