4
Remove all literature and packing
material from inside the ice cream
maker. Separate the lid from the
motor by pulling apart. Wash the
freezing cylinder, lid, driveshaft
and churn blade in warm soapy
water. Thoroughly rinse and dry
all parts. DO NOT immerse elec-
tric motor assembly in water.
To clean, wipe with a moist cloth.
Parts and Features of Your
Ice Cream Maker
1.
Electrical Motor Assembly
2.
ON/OFF Switch
3.
Lid Opening
4.
Driveshaft
5.
Churn Blade
6.
Cylinder Bowl
7.
Lid
8.
Lid Locks
Before First Use
1.
Assemble the lid, motor, and
driveshaft.
To insert
driveshaft
into motor
unit, slide
motor onto
lid until the
“keyhole”
part of lid
is over
hole into which the driveshaft
fits. Push the driveshaft into the
hole.
NOTE:
Make sure that the non-
keyhole part
of the lid fits
between the
top and
bottom
collars of the
driveshaft.
Assembling the Ice Cream Maker
840117200 ENv00 5/21/03 10:52 AM Page 4
