manualshive.com logo in svg

Suunto AMBIT3 PEAK 2.0, User Manual, Page: 63 / 139

Share
Download
Suunto AMBIT3 PEAK 2.0 User Manual Download Page 63

5. Enter the passkey shown on your watch display into the paring

request field on your mobile device and tap PAIR.

 NOTE:

 The Android version of the Movescount App is currently

release as an open beta. Check out the beta blog for the latest

news. Future releases of both app versions will be communicated

via suunto.com.

3.21.1  Second display on phone

If you are using the Suunto Movescount App, you can use your
mobile phone as a second display for your watch.
To use your mobile phone as a second display:
1. Pair your Suunto Ambit3 Peak with Suunto Movescount App if

you have not done so already (see 

3.21 Movescount mobile app).

2. Go to a sport mode in your Suunto Ambit3 Peak (see

3.10 Exercising with sport modes).

3. Open Suunto Movescount App and tap 

MOVE

.

4. Select 

AMBIT3

 from the list and tap 

NEXT

.

5. Start and stop your exercise recording as normal.

 TIP:

 Tap on each of the display areas on the phone – middle,

upper left, upper right – to change what is displayed.

3.21.2  Syncing with mobile app

If you have paired your Suunto Ambit3 Peak with Suunto
Movescount App, changes in settings, sport modes, and new moves

63

Summary of Contents for AMBIT3 PEAK 2.0












































































































































Reviews:

No comments