Sutron TesiMon TM1500, User Manual

Page: 11 / 26

2-5
Installation and Commissioning
2.3 Connecting the Device
2.3.1 Touch Screen (Option) and VGA
Figure 2-4 Connecting the touch screen and VGA
1. Connect the male connector of the touch screen cable with the 9-pin touch
screen interface and fasten the connector using the knurled screws.
2. Connect the female connector of the touch screen cable with the serial interface
(COM) of your PC and fasten the connector using the knurled screws.
3. Connect the VGA cable with the 15-pin female connector of the graphics card of
your PC and fasten the connector using the knurled screws.
4. Connect the other end of the VGA cable with the 15-pin VGA interface of the
monitor and fasten the connector using the knurled screws.
Make sure that your PC and monitor are disconnected from the supply voltage.