Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 61
When download is complete, press “Save File…”. Note the file is named by the end time
in the span.
6.12.
Viewing/Clearing the Status
Go to Dashboard
The status is displayed in the top left giving the station name, time, number of
measurements enabled, errors, alarm status, battery voltage, transmission status.
Press “Refresh Status” to update the status.
Press “Show Details” to see additional information.
Press “Clear Status” to clear any errors.
6.13.
Software Version
You can find the version of the software on the diagnostics tab of LinkComm. The Serial Number
of the product is listed there as well.
You can also obtain the version of the software using the VER command via command line.
6.14.
Setting Time
You do not need to set the time yourself in Satlink. Every Satlink Logger transmitter has a built-in
GPS module. The GPS module has the ability to get the time from the GPS satellites. The GPS
module needs to be connected to an antenna and that antenna needs to have a clear view of the
