3.12
DAILY TEMPERATURES
This table gives an overview over the daily temperatures for the last four
weeks. It shows the temperatures logged at 4 am each night and the
most recent value is on top. The current settings (at 4 am) of number of
rotations, wait time, fan speed etc is also logged. The settings become
visible using the scroll list at the bottom. Use the up and down buttons
for navigating up and down in the table.
3.13
TEMPERATURE GRAPH
This chart gives an overview over the temperatures inside the cylinder
for the last 24 hours. It is constantly updated with the timeline
changing. The chart cannot be navigated; it is a view-only chart.
3.14
FOOD WASTE/COMPOST LOG
If the weight/volume of food waste, pellets and compost are logged, all
values logged the last four weeks are displayed in this table. The newest
recording is visible on top.
3.15
NUMBER OF ROTATIONS
In this menu you set the number of rotations the cylinder does when it rotates after the wait time
period. Choose 1, 2, 3, 4 or 5 on the numeric keyboard that appears after pressing the number visible.
One rotation is one full revolution of the cylinder putting it back in the same position as it started with
the inspection doors on the cylinder in position under the inspections door on the hood. During the
rotation the material inside the cylinder is aerated. The fan is automatically turned on at full speed
filling the cylinder with fresh air. When the material is aerated, steam, CO2 and heat are emitted. One
turn can lower the temperature inside the composter by up to 10-15°C. Each rotation aerates the
material inside the cylinder for approximately 2 minutes. Every rotation is a full revolution of the
cylinder. The wait time in between rotations is the period of time that the cylinder is in resting mode,
not moving. See more information in 4.3.1 Function of number of rotations and wait time.
THE RECOMMENDED
NUMBER OF ROTATIONS
IS 1.
Choose between: 1, 2, 3,
4 and 5 rotations.