1.13.3
WARNING – INFEED HOPPER LID
When the infeed hopper lid is opened there is a small warning sign
flashing on the touch screen. When the lid is closed this warning sign
disappears. There is no need to reset the machine after opening and
closing the infeed hopper lid.
1.13.4
INSPECTION DOOR(S) OPEN
When any of the inspection door(s) on the hood is opened there is a small
warning sign flashing on the touch screen. Close the inspection doors.
W
hen the doors are locked, reset the machine using the reset button.
1.13.5
EMERGENCY STOP
When an emergency stop button is pressed there is a text appearing on
the touch screen with an instruction that should be followed: ‘Warning!
Emergency Stop active. Twist to release the Emergency Stop button and
reset the machine on the reset button.’
1.13.6
SAFETY COMPONENTS
Safety PLC and the electrical parts that are connected to the safety PLC such as emergency stop
buttons, safety switches, frequency inverters and contactors are marked with ‘safety component’ in
the Machine Specification. If a safety component is replaced on the machine the exact same brand
and type must be used in order to keep the safety performance level of the machine.