sussextaps.com.au
Tapware is to be installed by a Licensed
Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa.
Maximum water temperature is 65 deg.c.
INSTALLATION GUIDELINES
- The Rail is supplied part assembled to suit a Top Water Inlet
installation.
- FOR BOTTOM WATER INLET INSTALLATION SEE PAGE 3.
- Remove Inlet Fitting and Wall Fixing by loosening the Set
Screws.
- Accurately mark out and drill for the Wall Fixing 900mm from
centre of Water Feed (see Spring Toggle Wall Anchor guide).
- Ensure the wall penetration is sealed prior to connecting any
fittings.
- Apply thread tape or appropriate sealant to Water Feed Thread
and attach Inlet Fitting using 10mm Allen key.
- Using the provided Spring Toggle Anchor attach the Wall
Fixing.
- Fit the Rail Shower as assembled onto the Wall Fixing and Inlet
Fixing, secure by tightening the Set Screws.
- Align and fit the Shower Arm over the Outlet Post.
- Secure Shower Arm by tightening Set Screws (tighten well).
- Attach Shower Head, tighten using spanner.
- Test function and water flow on both Shower Head and Hand
Shower.
- Check for water leaks.
Voda Twin Shower Rail
Product code:
V TRS
INSTALLATION GUIDE
22
320
900
345
115
250
60
1360
1
Shower
Hose
Shower
Hose
Extension
Check Valve
1/2" BSP
Lugged Elbow
Water Feed
FINISHED WALL
Apply Sealant
Inlet
Fitting
15-20mm
Diverter
To Suit
Toggle
Wall
Anchor
Fixing
Body
Shower Arm
Shower Head
Slide Rail
Noggin
Hand Shower
Check Valve
900mm
Toggle
Anchor
Wall Fixing
Use 10mm Allen
Key To Fit
Set
Screws
x2 Set
Screws
Dress ring
Dress ring
Set
Screw
Outlet Post