Model # 22
-
4022
SUP Stow & Go System
Parts List
Qty
Name
1
Stow & Go Strap
2
Mounting Bracket
4
Philips Head Screw
1
Nylon Storage Bag
Holds up to 100 LBS
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
For Technical assistance or Replacement parts: call 866.787.7369
Rev. 11/17
Tools Needed :
Tape Measure, Electric Drill, ³/₁₆” Drill Bit,
and #3 Phillips Head Driver
1.
Locate the wall studs where Stow & Go System will be mounted. The recommended
spacing is 16” apart to allow for stud placement.
2.
Use a Mounting Bracket as a template to mark the hole locations. Push a mounting
screw into wall to mark the locations for holes.
.
.
.
3.
Use the ³/₁₆” drill bit to drill both holes. It is important that these go into a wood stud.
4.
Use #3 Phillips Head Driver to insert screws through bracket and into holes. Repeat
for second bracket.
5.
Adjust the strap lengths to gently cradle your SUP or surfboard.
Pro Tip: An old woodworkers trick is to rub the screw
threads on a bar of soap for easy installation.
