Model # 22
-
9908
Parts List
Qty
Name
1
All
-
Terrain Cart Frame
2
Mag
-
Lite Wheel
2
Cam Buckle Strap Set
4
Bunker Bar Locking Pin
with Tether
Holds up to 300 lbs.
All-Terrain Airless Cart
Tools Needed :
Adjustable Wrenches (2)
1.
Rotate the 2 Bunker Bars to a vertical position on cart frame.
Use the 4
Bunker Bar Locking Pins w/Tether
to hold Bunker
Bars in place during the assembly process. Then turn cart
upside down for wheel assembly.
2.
Remove
Serrated Flange Nut
from wheel axle (opposite side
of the
Black Knob).
3.
Rotate
Inner Wheel Guard
up, and insert wheel axle through
tab. Secure with the
Serrated Flange Nut .
Tighten
Serrated
Flange Nut
with wrench while using 2nd wrench to hold
nuts on the other side of the metal tab.
4.
Undo
Black Knob
from wheel axle. Rotate inner wheel guard
(with wheel) and outer wheel guard so the axle passes
through hole in tab of the
Outer Wheel Guard
.
Re
-
attach
Black Knob
onto axle and tighten fully by hand.
5.
Repeat on other side then turn cart over and flip the kick
-
stand down for balance to complete cart assembly. Note:
the kickstand is purposely shorter than the wheel allowing
the cart to tilt.
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Rev. 12/20
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
or
Visit Suspenz.com
“
Video & Manual
”
page
*
QR code reader app required
Scan* to see
Video Instructions
for Assembly & Use
Wheel
Serrated Flange Nut
Black Knob
Inner Wheel Guard
Outer Wheel Guard
Discard; used for
packaging only
