Installation
Adjustment system - Installation Instructions
Page 37
6.4
Space Requirements
For detailed information on space requirements refer to the Section 4.1
“Technical specifications”.
6.5
Component Alignment
A level will be required to ensure the entire work surface is horizontal and level.
Create a good starting point for leveling, by completely threading the leveling feet in the
lifting elements. The screw insertion depth is up to 32 mm. In the leveled state, the screw
insertion dept should be at least 18mm.
Place a level on the surface of the workplace.
Ensure a very uniform load distribution when using several lifting elements.
Figure 25 Adjusting the workplace with a spirit level