Installation
Adjustment system - Installation Instructions
Page 21
Do not operate the system outdoors. Do not expose the system to damp or wet conditions.
Avoid environments with chemical agents or corrosive environments.
Do not operate the system near flammable solvents, propellants and/or explosive substances
(e.g. gas, vapor, dust, etc.).
Do not expose the components of the Height Adjustment System to any vibrations and/or
shock loads.
Do not use the controller near the equipment that generates strong electromagnetic fields.
This may impair the function.
In order to prevent overheating in the controller, it should not be installed in constrained,
non-ventilated or thermally insulating locations. Adequate air circulation must be ensured.
IMPORTANT
Observe the country-specific regulations regarding setup and operation of
workplaces with respect to lighting of the workstations.
For example: Lighting in accordance with ASR A3.4
The Technical Rules for Workstations (ASR) reflect the state of the art technology, occupational
medicine and occupational hygiene and other sound knowledge for the setup and operation of
workstations.
The values given in the table are the intensity of illumination on the reference area for visual tasks
that may be horizontal, vertical or inclined.
Lighting requirements (metal machining and processing, foundries and casting)
Working rooms, workplaces and jobs
Minimum value of
the illumina-tion
intensity
In lx
Minimum value of
the color
rendering
Index Ra
Metal machining and processing, foundries and casting
Assembly work:
- Rough
- Medium-fine
- Fine
- Very fine
200
300
500
750
80
80
80
80
Table 7 Lighting requirements
