Installation
FixFrame – Assembly Instructions
Page 31
5.3.2.10
Laying of electric wires and cables (exemplary)
When laying the cables, make sure that
they cannot get jammed
they are not subjected to mechanical loads or stresses (tension, pressure or bending
etc.)
they cannot be damaged in any other way
Fasten the lines with adequate strain relief and adequate protection against kinks.
Wind up long electrical lines and attach them with adequate cable holders (not
included in the scope of delivery) on the bottom of the tabletop.
Use caution so as not to damage the lines.
Check the electrical lines and cables to ensure that they are fastened securely and
have not been damaged.
5.4
Space requirements
For detailed information on space requirements refer to section 4.1 “Technical specifications“.
