Decommissioning
SUSPA ELS3 HeavyDuty - Installation Instruction
Page 67
9
Decommissioning
9.1
Component Storage
The storage area should be cool and dry in order to prevent corrosion of the parts of the Height
Adjustment System and the HeavyDuty subframe.
Pack the parts of the Height Adjustment System including the HeavyDuty subframe in such a
way that they are protected from damage by external influences during storage.
If necessary, use cardboard boxes and other packaging material.
Secure the parts of the Height Adjustment System including the HeavyDuty subframe against
accidental tilting and instability.
Transport and storage conditions
Temperature:
-25 °C to +60 °C
Rel. Moisture:
10% to 95% (non-condensing)
Air pressure:
106 kPa to 70 kPa
Table 22 Transport and storage conditions
9.2
Disposal of Components
Dispose of the packaging material in accordance with national regulations.
Dispose of cardboard packaging, protective packaging made of plastics and preserving
agents separately and professionally.
The users are obliged to return the old equipment to a returns center for old electrical and
electronic equipment.
The disposal of the controller is subject to the Elektro-G (Electrical Equipment Act), the EC Directive
2002/95/EC internationally (RoHS with effect from 7/1/2006) or the respective national legislation.
The disposal of the components (also operating materials) in other countries should be performed
in accordance with the local disposal regulations and environmental protection laws in the country
where the machine is used.
If the equipment has reached the end of its life cycle, ensure a safe and professional disposal when
dismantling, in particular for those parts or substances which are hazardous for the environment.
This includes lubricants, plastics and batteries etc.
Have the machine disposed of properly by an authorized specialist company on account of
the potential risk of environmental pollution.
