Surveon NVR7312(2U) User Manual Download Page 43

Page: 43 / 367

3.3.1. Standalone Server (Client-Server All-in-One)

For users with standalone Server, the Local Client UI is used to manage NVR

Server services:



Application:

The Server, IP cameras are all in the same LAN.

Use NVR as Server

No installation needed.

Use PC as Server

Install both the VMS/NVR Server and VMS Client on a PC:



Insert the VMS/IPCAM product CD.



Click

VMS Suite

on the menu to start

the installation.



Choose

Typical Setup

. If you don’t need video analytic

functions,

Advanced Setup

can be selected to uncheck the VI Server.

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Brands by name

Popular brands