Surveon NVR7312(2U), User Manual, Page: 273 / 367

273
12.2.3. UPS
The system can connect to an UPS (Uninterruptible Power Supply) device to ensure
continuous recording and survive power outages. Connect the UPS device to the USB
port and input the required UPS IP Address and click Connect . Once the UPS device
is connected successfully, the manufacture, the model, the serial number, and the
estimated protection time will be shown.
UPS settings
Click enable and select one of the following options.

Turn off the system when power of the UPS remains XX %. (define the
percentage)

Turn off the system when power of the UPS remains XX min. (define the time)