178
8.4.9. Tailgating Detection
This functionality is currently available for remote client only.
Tailgating detection involves using the software to analyze the video feed and
detect a tailgating object crossing over the restricted area.
Note:
Tailgating Detection can also be configured by clicking
Camera List > Video
Analytics >
Tailgating Detection
in the VMS Console.
Configuring and Editing Detection Windows
To configure a new detection window:
1.
Right-click the camera entry in the
Device Browser
, and click
VI Setup >
Tailgating
>
Select Camera
option. Select a specific camera for VI Setup.
2.
If a new window is desired, select Define Dividing Line and click the New
Region button to create a new dividing line. Only 1 dividing line can be set for
each camera.
3.
Click and drag the created dividing line to the desire position and direction.
4.
If an object size has not yet been defined, select Define Object and click the
New Region button to create an object box.
5.
Click and drag the corners of the object box to define the minimum size of the
objects that will be detected.
6.
Adjust the sliders: (Settings will be applied to all existing windows)
7.
Click
OK
to save the changes and exit the popup.
Testing Detection Windows
To test a detection window:
1.
Right-click the camera entry in the Device Browser, then highlight and click
the
VI Setup > Tailgating
>
Select Camera
option.
2.
Click the
Begin Simulation
button enable test detection. During testing a red
border will appear if any intrusion found.
3.
Click
End Simulation
to end the simulation.
Summary of Contents for NVR7312(2U)
