165
Testing Tampering Detection
To test a detection window:
Right-click the camera entry in the
Camera List below the Live View
, then
highlight and click the
VI Setup > Tampering
>
Select Camera
option.
Click
Save Reference Image
to have a reference image saved and the system
will use this saved image to compare with the live recording image to see if
there is any different; when the 2 images are different, the alarm will be
triggered.
Click the
Begin Simulation
button enable test detection. During testing a red
border if tampering is detected.
Click
End Simulation
to end the simulation.
Click
OK
to exit the popup.
Summary of Contents for NVR7312(2U)
