Surveon NVR7312(2U), User Manual

Page: 160 / 367

160
8.4.1. Camera Motion Detection
Camera motion detection involves using the camera hardware to analyze the video
feed and detect motion in specified areas.
Configuring and Editing Detection Windows
To configure a new detection window:
1. Right click the camera entry in the Camera List below the Live View, and click
VI Setup > Camera Motion > Select Camera . Select a specific camera for VI
Setup.
Note : You must be logged into the camera before changing settings or else the
operation will fail.
2. If a new window is desired, enter a name in the New Window Name field and
click the New button. Up to 3 detection windows can be set for each camera.
The current window will be highlighted.
3. Click and drag the window border of a window to resize or reshape the window.
4. Click the interior of a window to drag it to the desired position.
5. Adjust the sliders: (Settings will be applied to all existing windows)

Sensitivity – Adjusts window sensitivity from 0 (low) to 100 (high).

Percentage - Adjusts the amount of the window that must change
before an event is triggered.
6. Click Apply to save the changes and OK to exit the popup.