Surveon NVR7312(2U) User Manual Download Page 110

Page: 110 / 367

110

6.3. Functionality within Views

Right clicking an active window will cause a function list to appear. These are settings

and functions that can be changed within the live-view window.

6.3.1. Object Tracking

Object tracking can be used to track object. Only one channel could be added to do

the object tracking. Select one channel. Right-click the panel and select

Object

Tracking

to activate the function. The selected framed and tracking object will

display surrounded in blue square.

Summary of Contents for NVR7312(2U)
















































































































































































































































































































































































Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands

Surveon NVR7312(2U), User Manual

Search results

Summary of Contents for NVR7312(2U)

Reviews:

Related manuals for NVR7312(2U)

Brands by name

Popular brands