960H IR
Indoor Mini Dome Camera
Camera Installation & Configuration
Please carefully read these instructions before using this product.
Save this document for future use.
31375AB
Regulatory Compliance
Emissions
FCC part 15, subpart B, Class A
CE: EN61000-6-4:2007
Immunity
CE: EN60130-4:1995 + A1:1998 + A2:2003
FCC COMPLIANCE
This product has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. The product generates, uses, and can
radiate radio frequency energy, and, if not installed and used in accordance with
the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this product in a residential area is likely to cause
harmful interference, in which case you will be required to correct the interference
at your own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference
that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a non-residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference with the radio or television reception, which can be deter-
mined by turning the equipment off and on, you are encouraged to try to correct
the interference by one or more of the following measures:
1.
Reorient or relocate the antenna of the radio/television receiver.
2.
Increase the separation between this equipment and the radio/television
receiver.
3.
Plug the equipment into a different outlet so that the equipment and the
radio/television receiver are on different power mains branch circuits.
4.
Consult the dealer or an experienced radio/television technician for
additional suggestions.
General Specifications
Model No.
IKS-D207
Image Sensor
1/3” Sony CCD
IP Rating
N/A
Type / Format
NTSC
Wide Dynamic Range
Sony True WDR
Minimum Illumination
Color: 0.15 Lux
B/W: 0.05 Lux
(@ 40IRE)
Day / Night
True Day / Night
Resolution
700TVL
Service Monitor Jack
Yes
S/N Ratio
>52dB (AGC Off)
Focal Length
2.8 mm ~ 12 mm
Iris Control
Auto-Iris
Synchronization
Internal / Line Lock
Video Output
1.0Vpp 75Ω BNC Unbalanced
White Balance
AWB, ATW, manual
Auto White Balance Range
1800K ~ 10500K
Backlight Compensation
BLC, HLC, Off
Auto Gain Control
Yes, 6~44dB
Operating Temperature
14˚ ~ 122˚ F (-10˚ ~ 50˚C)
Heater
No
Power Consumption
5.4W
Rated Amperage
0.45A (12vDC) / 0.38A (24wAC)
Input Voltage
12vDC / 24vAC
Weight
1.1 lbs (0.5kg)
Dimensions
ø5.125” (130.2 mm) x H: 3.97” (101mm)
Housing / Dome Cover
White / Clear
Precaution
• Do not attempt to dismantle the camera module mounted
within the dome. There are no user serviceable parts in
the camera module. Refer servicing to a qualified profes-
sional.
• Handle the camera with care. Do not abuse the camera.
Avoid striking or shaking it. Improper handling and stor-
age could damage the camera.
• Do not operate the camera beyond its temperature or
power source rating. Refer to the environmental informa-
tion provided in this document.
Features
• 700 TVL Resolution
• Digital Noise Reduction
• 3-axis camera
• Wide Dynamic Range
• True Day/Night
Box Contents
• Screws (x 2)
• BNC service monitor cable
Dimensions
9740 Irvine Blvd.
Irvine, CA 92618
1-877-855-1349
www.toshibasecurity.com
Model no:
IKS-D207
