2
Waranty Policy ..............................................................2, 3
Warnings ............................................................................3
Introduction .......................................................................4
Specifications ....................................................................4
Unpacking, Assembly and Setup ....................................4
Inserting Wire Rope .........................................................5
Operation ...........................................................................5
Maintenance ......................................................................6
Troubleshooting ................................................................6
Parts Breakdown and Parts List ................................7 - 12
WARRANTY POLICY
JET EQUIPMENT AND TOOLS LTD.
(JET
®
) makes every effort to ensure
its products are manufactured to the
highest standards and are guaranteed
against defects in materials and
workmanship when the product is
used for the purpose for which it was
designed. This guarantee applies only
to JET products purchased new from a
JET authorized distributor.
JET product warranties are extended to
the original retail purchaser only. This
warranty does not apply to any product
showing signs of abuse, misuse,
alteration, or having been improperly
maintained or repaired.
This warranty does not cover damage
attributable to normal wear and tear.
Any JET product that fails during
normal use and is within the specified
warranty period for that product will be
repaired or replaced at JET’s discretion.
Repairs and/or replacements are
warranted as described for the specific
product only for the remainder of the
warranty period.
Repair or replacement is the exclusive
remedy for defective products under
this warranty.
Warranty is expressly in lieu of all
other warranties, including the implied
warranty or merchantability or any
implied warranty of fitness for a
particular application.
Any JET product for which there is
a warranty claim should be returned
PREPAID to an authorized JET
distributor or service centre. Authorized
Warranty Depots can be found at
surewerx.com
All warranty claims must be
accompanied by proof of purchase and
an explanation of the defect or failure.
It is the customer’s responsibility to
provide this information.
JET shall not be held liable for any
consequential or incidental damages
for breach of any expressed or implied
warranty on their products. No claim
for damages or any type will be
considered, and all products are sold
with this understanding.
Any costs incurred to obtain warranty
consideration or services are the
Customer’s responsibility including
shipping and handling, travel, lost time
or lost production.
SPECIFIED WARRANTY – MATERIAL HANDLING
1 Year Limited Warranty
Chain Hoists Hand Cable Pullers
Air Hoists Lever Chain Pullers
Electric Hoists
Grip Pullers
Electric Trolleys Manual Adjustable
Trolleys
Drum Clamps Beam Clamps
Plate Clamps Blocks and Sheaves
Pallet Trucks Mobile Lift Tables
Winches
GENERAL INFORMATION ON JET
CHAIN HOISTS AND PULLERS
Customs Lifts – Custom lift lengths are
available, however, custom lift hoists
and pullers are NOT returnable.
CAUTION: be sure that supporting
structures and load-attaching devices
used in conjunction with hoists,
provide an adequate safety factor to
handle the rated load plus the weight
of the equipment. If in doubt, consult a
qualified structural engineer.
This equipment is not to be used for
lifting, supporting, or transporting
people, or lifting, supporting, or
transporting loads over people.
IMPORTANT: Before installation
and operation, see maintenance and
operations manual for additional
warnings, precautions and operating
instructions.
NOTE: Batteries supplied with certain
products may have been subjected to
long shelf life, resulting in low energy
or a dead battery. Please source
replacement batteries locally. Please
follow instructions in the manuals for
products using rechargeable batteries.
Dead batteries do not constitute a
warranty claim.
TABLE OF CONTENTS
M18-MH111136-38-Eng+Fre-FA.indd 2
2018-07-23 4:11 PM
