HOW TO OPERATE
1. Slide and remove the battery lid, install two
AAA/UM-4 batteries matching correct (+) and (-)
poles as indicated, then slide the battery lid back.
2. Pull out the antenna and turn on the switch to upper
side.
3. The power LED (Green) will be lit up to confirm the
detector is operated correctly.
4. If the strength indication LED is lit up and the buzzer
goes off, adjust the sensitivity by tuning the
Sensitivity Tuner to - (minus) side to decrease the
sensitivity until the Level 1 (Yellow) LED slightly
lights up.
5. When the detector detects a cellular phone or wireless
hidden camera, the strength of indicator will be lit up,
from Level 1 (Yellow) -> Level 2 (Yellow) -> Level 3
(Red ) indicating the strength of detected signals.
6. Meanwhile, the buzzer will be beeping and the sound
will be changing from slow to rapid, indicating the
strength of detected signals.
SILENT DETECTION
• SH-055SR: Set the power switch to bottom SILENT mode.
• SH-055SRV: Set the power switch to bottom VIBRATING mode.
• By earphone hearing.
SENSITIVITY ADJUSTMENT
Turn the Sensitivity Tuner to - (minus) side to decrease the
sensitivity and the detecting distance will be shorter. Turn the
Sensitivity Tuner to + (plus) side to increase the sensitivity and
the detecting distance will be longer.
INTERFERENCE (BACKGROUND NOISE)
ELIMINATION
1. The Sensitivity tuner is also used to eliminate the background
noise (interference).
2. If the scanned environment has other noises that interfere with
your detector, the strength indication LED will be lit up.
3. If this condition appears, adjust the sensitivity by tuning the
Sensitivity Tuner to - (minus) side to decrease the sensitivity
until the Level 1 (Yellow) LED slightly lights up.
4. In normal condition, when to turn on the power, only the
Power LED (Green) lights up to confirm the detector is in
normal condition.
PRINCIPLE PARTS
User's Manual
Suresafe™
Thank you for purchasing the Suresafe™ RF (Radio Frequency)
Signal Detector. Please first read over this manual for proper use,
save this manual and keep it handy.
SH-055SR, SH-055SRV
Superior sensitivity
RF Signal Detector
Exposing Spy Camera, Bug and Cellular Phone, etc.
GENERAL
This device applies with fuzzy scanning technology to detect
peeping cameras, bug, cellular phones and other radio frequency
devices. This device surely avoids being peeped or tapped to
protect privacy or protect information being disclosed secretly.
This device has 3 LEDs. When to detect cellular phone or
peeping camera, the LED will light from Level 1 to Level 2 to
Level 3, and the beeping sound will change from Slow to Rapid
indicating the strength of detected signal.
• SH-055SR: This model also has SILENT detection to reduce
the embarrassment of beep sound when to scan an
environment.
• SH-055SRV: This model also has VIBRATING detection to
warn you when you do not hold this device in
hand to scan an environment.
• Besides, you also can detect by earphone hearing without
other' awareness.
SH-055SR
SH-055SRV
Level 3
Level 2
Level 1
Power
Sound
Vibrate
Off
Sensitivity
Tuner
RF Signal Detector
OFF
earphone
Level 3
Level 2
Level 1
Power
OFF
Sound
Silent
Off
Sensitivity
Tuner
RF Signal Detector
earphone