7
BEFORE INSTALLATION
•
Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments
may be needed to optimize performance.
•
Make sure you have sufficient separation between outdoor antenna and indoor antennas. At least
50 ft. is recommended for best performance.
•
Ensure sufficient cable length between the outside antenna location and
booster location. The length of the provided cable is 75 ft.
•
For kits that use directional antennas (outside or inside), the directional
antenna(s) should be oriented in a way that do not “face” the other antenna
(see “Antenna Aiming” Diagram).
Installation Overview
Step 1. Find the outside area that has the strongest signal.
Step 2. Install the outdoor antenna in the area identified in step 1.
Step 3. Install the indoor antenna(s) where signal is needed.
Step 4. Place the booster in appropriate location and route cables from outdoor and indoor antennas
to the booster.
Step 5. Connect cables to the booster and finally, the booster to an AC power source.
Check System and optimize Installation, if needed
Aiming Directional
Antennas
OK
Outdoor/ Indoor Antenna Separation
A minimum of 50 ft. of separation between
the outdoor antenna and indoor antennas is
recommended for best performance.
Reducing antenna separation will reduce the
coverage provided by the booster and generally,
additional separation will provide better
performance.
Ante
nna S
epara
tion
Required distance between
indoor & outdoor antennas
Antenna Separation
before InstallatIon
Inside Antenna
Coax Cables
Cable Splitter
Signal Booster
Inside Antenna
Outside Antenna
» 1-855-846-2654 » https://www.signalbooster.com » [email protected]
