SureCall DUAL FORCE User Manual Download Page 16

WARRANTY

 

 
 
 

SureCall Dual Force  

Cellphone-Mate, Inc. 

 Page 16 

          All rights reserved. 

Warranty 

Two-Year Product Warranty 

Cellphone-Mate warrants its products for two years from the date of purchase against defects in 
workmanship and/or materials. 

Products returned by customers must be in their original, un-modified condition, shipped in the original or 
protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise 
Authorization (RMA) number printed clearly on the outside of the shipping container.  

Buyers may obtain an RMA number for warranty returns by calling the Cellphone-Mate Return Department 
toll-free at 1-888-365-6283. Any returns received by Cellphone-Mate without an RMA number clearly printed 
on the outside of the shipping container will be returned to sender. In order to receive full credit for signal 
boosters, all accessories originally included in the signal booster box must be returned with the signal 
booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as 
antennas or cables.)  

This warranty does not apply to any product determined by Cellphone-Mate to have been subjected to 
misuse, abuse, neglect, or mishandling that alters or damages the product’s physical or electronic properties. 

Cellphone-Mate warrants to the Buyer that each of its products, when shipped, will be free from defects in 
material and workmanship, and will perform in full accordance with applicable specifications. The limit of 
liability under this warranty is, at Cellphone-Mate’s option, to repair or replace any product or part thereof 
which shall within TWO YEARS of purchase as determined by examination by Cellphone-Mate, prove 
defective in material and/or workmanship. Warranty returns must first be authorized in writing by Cellphone-
Mate. Disassembly of any Cellphone-Mate, Inc. product by anyone other than an authorized representative of 
Cellphone-Mate voids this warranty in its entirety. Cellphone-Mate reserves the right to make changes in any 
of its products without incurring any obligation to make the same changes on previously delivered products.  

As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all 
products returned to Cellphone-Mate for repair, and Cellphone-Mate will pay the return shipping with the 
exception of products returned from outside the United States, in which case the Buyer will pay the shipping 
charges.  

The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, 
which are found to meet the applicable specifications or which are not defective or not covered by this 
warranty.  

Products sold by Cellphone-Mate shall not be considered defective or non-conforming to the Buyer’s order if 
they satisfactorily fulfill the performance requirements that were published in the product specification 
literature, or in accordance with samples provided by Cellphone-Mate. This warranty shall not apply to any 
products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse.  

Cellphone-Mate makes no warranty whatsoever in respect to accessories or parts not supplied by it. 

Summary of Contents for DUAL FORCE





















Reviews: