6 X 100WATT CLASS-D AUDIO
AMPLIFIER BOARD– TDA7498
USER’S GUIDE
©
2004-2012 Sure Electronics Inc.
AA-AB34181_Ver1.0_Page 1
1.1 Overview
Welcome to use this self-made 6*100W audio amplifier board which is a perfect class-D
architecture integrated TDA7498 chip to achieve the single-channel 100W power output.
With high efficiency, it especially is available for the outdoor venues where power supply
is always in consideration.
Resistance and capacity components of high quality, including X7R ceramic capacitors
and lower ESR electrolytic capacitors, are used to gain the perfect timber, finally realize
high S/N ratio, low THD+N, wide frequency response range etc.
Briefly, the power supply range and heat sink performance of each product distinguishes.
You may make the proper choice to meet your application needs.
FIGURE 1-1 OVERVIEW
1.2 Accessories
We don’t provide audio accessories together with this product. Please go to
www.sure-electronics.com
to choose what you need.
1.3 Features
y
A perfect "Class D" architecture
y
Frequency response: 20Hz to 20KHz(±3dB)
y
Four selectable, fixed gain settings of nominally 25.6 dB, 31.6 dB, 35.1 dB and 37.6
dB.
y
Single end audio signal input
y
Over/under voltage protection
y
Over
current
protection
y
Over temperature protection
Chapter 1. Overview
