4.0 Hardware Descriptions and Specifications
- 31 -
4.3.1 SG-DRL5-IP configurations
The following product ordering codes are available for the different configurations of the line card model SG-DRL5-IP:
SG-DRL5-IP STD
Standard Build
l
512 Visual Verification accounts (SD card required)
l
512 supervised accounts
l
3072 unsupervised accounts
l
Total accounts on each table 4096
l
1 table - With a valid license, 2 additional tables can be unlocked with the same table properties as table 1.
l
Total accounts with all 3 tables is 12228
l
1GB DDR3 memory (installed)
l
4GB EMMC memory (installed)
SG-DRL5-IPF
Full Build
l
2560 Visual Verification accounts (SD card required)
l
2560 supervised accounts
l
15360 unsupervised accounts
l
Total accounts on each table 20480
l
Three tables
l
Total accounts with all 3 tables is 61440
l
1GB DDR3 memory (installed)
l
4GB EMMC memory (installed)
SG-DRL5-IPE
CE Build
l
2560 Visual Verification accounts (SD card required)
l
2560 supervised accounts
l
Total accounts on each table 5120
l
1 table - With a valid license, 2 additional tables can be unlocked with the same table properties as table 1.
l
Total accounts with all 3 tables is 15360
l
1GB DDR3 memory (installed)
l
4GB EMMC memory (installed)
4.3.2 SG-DRL5-IP LED status indicators
After start-up, the line card enters Standby mode and monitors the network connection and the SG-CPM5. Depending on the system's status, the fol-
lowing conditions are displayed for each line card:
Normal operation
Trouble present
Problem with card or rebooting Decomission mode
Watchdog
Flashing
-
On or Off
Flashing
Trouble
Off
Flashing (see trouble table)
-
Flashing red
Network Status
Blue – 1Gb/s
Green – 100Mb/s,
Orange – 10Mb/s,
Red – Network Absent
-
-
Flashing red
LEDs during bootup
Boot-up Boot fail Unqualified memory
Watchdog
Flashing
On
Off
Trouble
Off
Off
Off
Network Status Flashing
On red
On red
Trouble table
Flashes/Color
Error
1/Yellow
CPM absent
2/Yellow
Line card busy out
3/Yellow
Printer buffer full
4/Yellow
Computer buffer full
