6
Ins
talla
tion
Installation
This document describes how to install ENCR-10 and connect ENCR-10's components and devices (CoreStation & Output
Module). For details on other wiring for each device, visit the Suprema website (
) and refer
to the installation guide for the device.
•
There is no optimal height for installing ENCR-10 on the wall. Install it to a safe and convenient location for you
to use.
•
Fixing screws for the enclosure, CoreStation, and the power supply cable are included in the ENCR-10 package.
Use each screw correctly by following the details below.
- Fixing screws for the enclosure (diameter: 4 mm, length: 25 mm) x 4
- Fixing screws for CoreStatioin (diameter: 3 mm, length: 5 mm) x 6
- Fixing screws for the power supply cable (diameter: 3 mm, length: 8 mm) x 1
Installing CoreStation
Securing the battery
Insert the battery velcro strap into the enclosure and secure the battery.
•
Use a backup battery with 12 VDC and 7 Ah or higher. This product was tested with 'ES7-12' battery of
'ROCKET'. It is recommended to use a battery corresponding to 'ES7-12'.