SUPPO OSD V3.71
10HZ/current sensor
Connetion Pins
Connector’s description
Current
sensor
To the add-on
Current sensor
from SUPPO
RSSI
Connect to your radio receiver’s
RSSI port
Config panel
Connect to
button panel
Main Batt
(to RC plane’s
battery)
Connect to your airplane’s battery
pack (monitor plane’s voltage
Max 28V).
As 11.7v shown on left
)
Video In
To you
Camera
Video out
For the OSD video output
GPS
To the GPS
unit supplied
Power in
Connect to power source for your
OSD
(
as Voltage 4.5V shown on left
)
Configuring OSD:
Press button
“Menu”
on “Config Panel” to enter system configuration
Use “Option SW” and “Select” button to configure
