Chapter 10 Setting
www.supmea.com
11
Chapter 10 Setting
Press MODE key to enter the password menu and then press UP/DOWN/SHIFT
key to input password 2008 then press ENTER will enter to setting mode or press
MODE key to exit. If no key is pressed and over 10 minutes then it will go back to
measurement mode.
10.1 Main display
Press UP/DOWN key to choose functions, press ENTER key enter the function.
Page1
Page2
Note:
1.
When the input data is not in correct range then it will display ERROR on
the top of LCD
2.
After input data user needs to press ENTER to save the data.
3.
Press MODE to exit.
4.
No key is pressed in 10 minutes then it will go back to measurement mode.
