Chapter 4 Signal Measurement
www.supmea.com
-19-
4.5 Regulating Valve
Output active voltage/current to the valve and measure the
feedback signal to regulate the valve.
Connect the signal cables based on Figure 7
Press the blue signal button
to switch the
measurement signal type to voltage/current
Press the yellow signal button
to switch the
output signal type to voltage/current
Press the yellow source button
and the value of
on the screen will turn from
to
,
and the output is started
The feedback measurement value of the valve is
shown on the LCD measurement value display area.
Figure 7 Regulating valve
Summary of Contents for SUP-C703S
Page 11: ......
