Chapter 4 Signal Measurement
www.supmea.com
-17-
4.3 Resistance/Thermal Resistance
Connect the black signal cable to the common
terminal and the red signal cable to the measurement
terminal.
Press the blue signal button
to switch the
signal type to Ω/PT100.
The actual measurement value is shown in the
measurement value display area on the LCD.
* Note: Resistance/Thermal Resistance is only for SUP-703
4.4 Thermocouple
Used for measuring the thermocouple temperature. With an
automatic or manual cold conjunction compensation function.
Connect the black signal cable to the common
terminal and the red signal cable to the measurement
terminal.
Press the blue signal button
to switch the
signal type to K/E/J/T/R/B/S/N.
The actual measurement value is shown in the
measurement value display area on the LCD.
If you need to check or adjust cold conjunction compensation
temperature, do as follows:
Summary of Contents for SUP-C703S
Page 11: ......
