Chapter 3 Signal Output
-
www.supmea.com
-12-
Flip the dial switch to the ON side of passive output to
enable the passive current output function.
Press
or
to adjust the output temperature
value.
Press the yellow source button
, and the value of
on the LCD will turn from
to
and the output is started.
Figure 3 2-wire transmitter simulator
3.6 Output or Measurement of Voltage and Current Signals
based on Display Range (Free from Range Conversion)
Valid when the signal type is voltage and current.
Press the yellow signal button
to switch the
display and the switching order is: range lower limit
(RL)→range upper limit (RH)→signal lower limit
(SL)→signal upper limit (SH)→none.
Summary of Contents for SUP-C703S
Page 11: ......
