Supero C9Z390-CG, User Manual

Page: 39 / 133

Chapter 2: Installation
2-13
2-6 M.2 Installation (optional)
Two M.2 (M-key) connectors are supported by the C9Z390-CG/CGW. M.2
devices are used for solid state storage and internal expansion. Follow
the steps below in order to install an M.2 device.
1) Locate one of two standoffs.
Remove the standoff and screw
and set them aside.
2) Plug the M.2 device into the M.2
connector and lower the semi-cir-
cle notched end onto the standoff.
3) Replace the screw and tighten
to secure the M.2 device into
place. Do not over-tighten so as
to avoid damaging the M.2 device.