Supero C7B360-CB-ML, User Manual

Page: 39 / 113

Chapter 2: Installation
2-13
2-6 M.2 Installation (optional)
Two M.2 (M-key) connectors are supported by the C7B360-CB-ML. M.2
devices are used for solid state storage and internal expansion. Follow
the steps below in order to install an M.2 device:
1) Locate one of two standoffs.
Remove and set aside screw.
2) Plug M.2 device into M.2 con-
nector.
3) Replace screw and tighten to
secure M.2 device into place. Do
not over-tighten so as to avoid
damaging the M.2 device.
2) Lower the semi-circle notched
end onto standoff.