S
UPERMICR
R
C
ontaCt
I
nformatIon
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: ftp://ftp.supermicro.com/CDR_Images/CDR-X11-UP/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2016 Supermicro Computer Inc.
All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's wri
tten
consent.
All T
rademarks are property of their respective entities.
All information provided is deemed accurate at t
he time of printing; however
, it is not guaranteed.
P
aCkage
C
ontents
X11ssH-Ctf/tf
Q
uICk
r
eferenCe
g
uIde
1.0
a
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
• One (1) Quick Reference Guide
• Website: www.supermicro.com
• General Information: [email protected]
• Technical Support: [email protected]
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f
or
your
system
to
work
ProPerly
,
Please
download
aPProPrIate
drIvers
/
Images
/
user
'
s
manual
from
tHe
lInks
below
:
M
N
L-
17
83
-Q
R
G
-1
0
a
DESIGNED IN USA
X11SSH-TF
REV:1.01
BAR CODE
SAS CODE
MEGERAC
LICENSE
IPMI CODE
MAC CODE
PRESS FIT
Intel
PCH
LSI3008
(-CTF only)
X550
BT1
JSAS1
JSTBY1
LEDS1
J2
SP1
LE1
LEDBMC
LEDPWR
JBT1
JPSAS1
JOH1
JL1
JPG1
JBR1
JVRM2
JVRM1
JPME2
JVR1
JPS1
JPB1
JI2C1
JI2C2
JWD1
JPTG1
JSD2
JSD1
FAN5
FANA
FAN3
FAN4
FAN1
FAN2
JUIDB1
JIPMB1
JPI2C1
JD1
JPWR2
I-SGPIO2
I-SGPIO1
I-SA
TA5
I-SA
TA4
I-SA
TA3
I-SA
TA2
I-SA
TA1
I-SA
TA0
JF1
JTPM1
JPWR1
I-SA
TA6
I-SA
TA7
J24
LE3
MH8
JPCK1
DIMMB2
DIMMB1
DIMMA2
DIMMA1
USB8(3.0)
USB4/5
USB9/10(3.0)
USB2/3
CPU Socket LGA1151
PCH SLOT4 PCI-E 3.0 X2(X4)
CPU SLOT6 PCI-E 3.0 X8
VGA
LAN2
LAN1
USB6/7
(3.0)
USB0/1
IPMI_LAN
COM2
COM1
Connectors
DIMM Memory Installation
Connectors and LED Indicators
Back Panel I/O Connectors
Memory Support
Motherboard Layout and Features
Jumpers
CPU Installation
Note
: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.
Note
: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note:
Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
Heatsink Installation
Front Panel Control (JF1)
CPU Support
LED Indicators
Apply thermal
grease
The X11SSH-CTF/TF motherboard supports up to 64GB of DDR4 ECC UDIMM
memory at a speed of 2133 MHz in four memory slots. Populating these DIMM
slots with a pair of memory modules of the same type and size will result in
interleaved memory, which will improve memory performance.
When installing memory modules, the DIMM slots should be populated in the fol-
lowing order: DIMMB2, DIMMA2, then DIMMB1, DIMMA1. Populate the blue sots
first. See the motherboard layout on the left for the location of the DIMM slots.
•
Always use DDR4 DIMM modules of the same type, size, and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the
speed of the slowest DIMM.
•
The motherboard will support odd-numbered modules (1 or 3 modules in-
stalled). However, for best memory performance, install DIMM modules in
pairs to activate memory interleaving.
Back panel I/O
1. COM Port
6. USB6 (3.0)
2. IPMI LAN
7. LAN1
3. USB1
8. LAN2
4. USB0
9. VGA Port
5. USB7 (3.0)
1
9
1
2
3
4
5
6
7
8
Pin 1
Socket Key
CPU Key
Press down
and turn
clockwise
Jumper
Description
Default Setting
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
CMOS Clear
Open (Normal)
JI
2
C1/JI
2
C2
SMB to PCI-E Slots Enable/Disable
Pins 2-3 (Disabled, Default)
JPB1
BMC Enabled
Pins 1-2 (Enabled)
JPCK1
LANCONF Flash
Pins 2-3 (Disabled, Default)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode
Pins 1-2 (Normal)
JPS1
SAS 3.0 Enable/Disable (X11SSH-CTF only)
Pins 1-2 (Enabled)
JPSAS1
SAS HDD Enable/Disable (X11SSH-CTF only) Pins 1-2 (Enabled, Default)
JPTG1
10Gb LAN Enable/Disable
Pins 1-2 (Enabled)
JVRM1
VRM SMB Clock (to BMC or PCH)
Pins 1-2 (BMC, Normal)
JVRM2
VRM SMB Data (to BMC or PCH)
Pins 1-2 (BMC, Normal)
JWD1
Watch Dog
Pins 1-2 (Reset)
Connector
Description
BT1
Onboard Battery
COM1/COM2
COM Port/COM Header
FAN1 ~ FAN5, FANA
System/CPU Fan Headers (FAN1: CPU Fan)
IPMI_LAN
Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA7
Intel PCH SATA 3.0 Ports
I-SGPIO/I-SGPIO2
Serial Link General Purpose I/O Headers
J24
M.2 PCI-E 3.0 X4 Slot
JD1
Power LED/Speaker Header (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1
Front Control Panel Header
JIPMB1
4-pin BMC External I2C Header (for an IPMI Card)
JL1
Chassis Intrusion Header
JOH1
Overheat LED Header
JPI
2
C1
Power Supply SMBbus I
2
C Header
JPWR1
24-pin ATX Power Connector
JPWR2
12V 8-pin Processor Power Connector
JSAS1
Eight SAS 3.0 Ports (X11SSH-CTF only)
JSD1/JSD2
SATA DOM Power Connectors
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
JUIDB1
UID Switch
LAN1/LAN2
LAN (RJ45) Ports
SLOT4
PCH PCI-E 3.0 X2 (IN X4) Slot
SLOT6
CPU PCI-E 3.0 X8 Slot
SP1
Internal Speaker/Buzzer
USB0/1
Back panel Universal Serial Bus (USB) 2.0 Port
USB2/3, USB4/5
Front Accessible USB 2.0 Headers
USB6/7
Back panel USB 3.0 Port
USB8
USB Type A Header
USB9/10
Front Accessible USB 3.0 Header
VGA
VGA Port
LED
Description
Status
LEDBMC
BMC Heartbeat LED
Blinking Green: BMC Normal
LEDPWR
Onboard Power LED
Solid Green: Power On
LEDS1
SAS Activity LED (X11SSH-CTF only) Blinking Green: SAS Active, Red: SAS Error
LE1
UID LED
Solid Blue: Unit Identified
LE3
M.2 LED
Blinking Green: Active
The X11SSH-CTF/TF motherboard supports an Intel Xeon E3-1200 v5, 6th
Gen Core i3, Pentium, and Celeron series processors in an LGA1151 type
socket.
Recommended Population (Balanced)
DIMMA1
DIMMB1
DIMMA2
DIMMB2
Total System Memory
2GB
2GB
4GB
2GB
2GB
2GB
2GB
8GB
4GB
4GB
8GB
4GB
4GB
4GB
4GB
16GB
8GB
8GB
16GB
8GB
8GB
8GB
8GB
32GB
16GB
16GB
32GB
16GB
16GB
16GB
16GB
64GB
LE3
SAS Heartbeat LED
Blining Green: SAS Normal
Power Button
OH/Fan Fail
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V
ID_UID_SW/3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
3.3 V
5V Stby
20
1
2
Ground
Power Fail LED
NIC2 Active LED
NMI