12
X11DPL-i User's Manual
Quick Reference Table
Jumper
Description
Default Setting
JBT1
Clear CMOS
Open (Normal)
JPME2
Manufacturer (ME) Mode Select
Pins 1-2 (Normal)
JVRM1
VRM SMB Clock (to BMC or PCH)
Pins 1-2 BMC (Normal)
JVRM2
VRM SMB Data (to BMC or PCH)
Pins 1-2 BMC (Normal)
JWD1
Watch-Dog Timer Enable
Pins 1-2 (Reset)
Connector
Description
Battery (BT1)
Onboard CMOS battery
COM 1
Front Panel COM port 1
FAN1 ~ FAN6
System cooling fan headers
FANA/FANB
Thermal fan headers for I/O add-on cards
IPMI_LAN
Dedicated IPMI LAN port
(I-)SATA0~3, 4~7
I-SATA 3.0 connectors supported by the Intel PCH
J25
USB 2.0 Header for USB ports 2/3
J26
USB 3.0 Type A port for USB4
JF1
Front Control Panel header
JIPMB1
4-pin external BMC I²C header (for an IPMI card)
JL1
Chassis intrusion header (Note: please connect a cable from the Chassis Intrusion header at JL1
to the chassis to receive an alert via IPMI.)
JNVI
2
C1
NVMe SMBus (I
2
C) header used for PCI-E hot-plug SMBus clock & data connections (an SMCI-
proprietary NVMe add-on card and cable are required; available for a Supermicro complete system
only)
JPI²C1
Power Supply I²C connector
JPWR1/2
8-pin Power connectors
JPWR3
24-pin Power connectors
JRK1
RAID key for CPU NVME SSD
JSD1/JSD2
Power connector SATA DOM
JSDCARD1
Micro SD Card slot
JSTBY1
Wake On LAN header
JTPM1
Trusted Platform Module (TPM)/Port 80 connector
M.2
PCI-E M.2 slot
(S-)SATA0/1
S-SATA 3.0 connectors supported by the Intel PCH
SP1
Internal speaker
USB0/USB1
Back panel USB 2.0 ports
VGA
Back panel VGA port
LED
Description
Status
LE1
UID (Unit Identifier) LED
Solid Blue: Unit Identified
LE6
Onboard Power LED
Solid Red: Standby
Solid Green: Power On
LEDM1
BMC Heartbeat LED
Blinking Green: BMC Normal
