manualshive.com logo in svg

Supermicro SuperWorkstation SYS-730A-I, User Manual, Page: 73 / 111

Share
Download
Supermicro SuperWorkstation SYS-730A-I User Manual Download Page 73

Chapter 6: Optional Components

73

Chapter 6  

 

Optional Components

This chapter describes optional system components.

6.1 Optional Parts List

Optional Parts List

Feature

Part Number

Mobile Rack

CSE-M14TQC/CSE-M28SACB

2.5" to 3.5" SSD/HDD adapter tray

MCP-220-73102-0N

2.5" HDD cage (4x Internal 2.5" HDD)

MCP-220-73201-0N

5.25" HH 24X DVD-RW SATA DRIVE PBF

DVM-LITE-DVDRW24-HBT1

4U Active CPU Heat Sink

SNK-P0080AP4

NVMe cable (one cable supports two U.2 NVMe SSDs)

CBL-SAST-0953

6.2 Additional Storage

A mobile rack can be installed in the chassis' 5.25" bay to support hot-swappable drives. An 
additional internal 2.5" hard drive cage can be installed beneath the rotating drive cage. Both 
the mobile rack and the hard drive cage require additional hardware or cables.

6.3 TPM Security Module

SPI capable TPM 2.0 with Infineon 9670 controller, vertical form factor
The JTPM1 header is used to connect a Trusted Platform Module (TPM). A TPM is a security 

device that supports encryption and authentication in hard drives. It enables the motherboard 

to deny access if the TPM associated with the hard drive is not installed in the system. 

Details and installation procedures are at:
 

http://www.supermicro.com/manuals/other/TPM.pdf

. 

• 

AOM-TPM-9670V

Summary of Contents for SuperWorkstation SYS-730A-I
















































































































Reviews:

No comments