71
Chapter 6: Optional Components
Chapter 6
Optional Components
This chapter describes optional system components and installation procedures.
6.1 Optional Parts List
Optional Parts List
Description
Part Number
Quantity
Power cable
CBL-PWEX-1043
1
Air shroud
MCP-310-51505-0B
MCP-310-51506-0B
1
TPM security module
AOM-TPM-9670V
AOM-TPM-9671V
1
6.2 Power Cable
The CBL-PWEX-1043 cable connects from PDB for extra PCIe power (2x4, PH4.2, M to
2x2x3, PH4.2, 2x2x1, PH4.2, F, 40/40/41/41).
6.3 Air Shrouds
The MCP-310-51505-0B Mylar air shroud provides cooling to the optional half-height NVIDIA
T4 GPU cards.
The MCP-310-51506-0B Mylar air shroud provides cooling to the optional full-height, full-
length add-on cards.
6.4 TPM Security Module
SPI capable TPM 2.0 (AOM-TPM-9670V) or 1.2 (AOM-TPM-9671V) with Infineon 9670
controller, vertical form factor The JTPM1 header is used to connect a Trusted Platform
Module (TPM). A TPM is a security device that supports encryption and authentication in
hard drives. It enables the motherboard to deny access if the TPM associated with the hard
drive is not installed in the system.
Details and installation procedures are at: