50
Chapter 3: Maintenance and Component Installation
Air Shrouds
The SYS-110P-FDWTR/SYS-110P-FDWTR-NEBS-DC support two air shrouds, one to direct
airflow to the CPU and another to direct airflow to the PCIe cards. There are two types of
PCIe card air shrouds, one for full-height cards and one for half-height cards.
Replacing the Air Shroud
1.
Position the air shrouds in the chassis, as illustrated below. The air shroud fits just
behind the fans.
2.
Slide the air shroud into the grooves just behind the fan rack. If necessary, move any
cables that interfere with the air shroud placement.
3.
Remove perforated tabs, if necessary, for a good fit.
Figure 3-6. Installing Air Shrouds for CPU and Optional NVIDIA T4 GPU Cards