Chapter 2: Server Installation
21
Outer Rack Rails
Outer rails attach to the rack and hold the chassis in place. The outer rails for the SC827
chassis extend between 30 inches and 33 inches.
Installing the Outer Rails to the Rack
1.
Secure the back end of the outer rail to the rack, using the screws provided.
2.
Press the button where the two outer rails are joined to retract the smaller outer rail.
3.
Hang the hooks of the rails onto the rack holes and if desired, use screws to secure the
front of the outer rail onto the rack.
4.
Repeat steps 1-3 for the remaining outer rail.
Note:
The figure above is for illustration purposes only. Always install servers to the bottom
of the rack first.
Figure 2-3. Assembling the Outer Rails
1
1
1
2
1
3
