Chapter 2: Server Installation
19
Figure 2-1. Identifying the Rail Sections
2.3 Installing the Rails
There are a variety of rack units on the market, which may require a slightly different assembly
procedure.
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the
specific rack you are using.
Identifying the Rails
The rack rails and the related hardware should have been included with the system. Refer to
Figure 2-1 to identify the rail sections. Note that these rails are left/right specific
Warning:
do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Slide rail mounted equipment is not to be used as a shelf or a work space.
1
1
1
2
1
4
1
3
Rail Assembly
Extending the Rails
Quick-
Release Tab
Separating the Inner Rail
Extension
