Supermicro SUPERSERVER 6013P-8 Plus, User Manual, Page: 65 / 108

Chapter 6: Advanced Chassis Setup
6-5
Accessing the Drive Bays
SCSI Drives: Because of their hotswap capability, you do not need to access the
inside of the chassis or power down the system to install or replace SCSI drives.
Proceed to the next step for instructions.
CD-ROM/Floppy Disk Drives: For installing/removing a CD-ROM or floppy disk
drive, you will need to gain access to the inside of the 6013P-8+ by removing the
top cover of the chassis. Proceed to the "CD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
Note: Only a "slim" CD-ROM drive will fit into the 6013P-8+.
Figure 6-3. Removing the Front Bezel
1. Unlock
2. Press release knob
3. Remove bezel assembly