Supermicro SUPERSERVER 6013P-8 Plus, User Manual

Page: 42 / 108

5-6
S
UPERSERVER 6013P-8+ User’s Manual
Figure 5-3. Front Control Panel Header Pins (JF2)
Power Button
O verheat LED
1
NIC1 LED
Reset Button
2
Power Fail LED
NIC2 LED
HDD LED
Power LED
Reset
Pwr
Vcc
Vcc
Vcc
Vcc
Vcc
G round
G round
19 20
Vcc
X
Ground
NMI
X
Connecting the Control Panel
JF2 contains header pins for various front control panel connectors. See
Figure 5-3 for the pin locations of the various front control panel buttons
and LED indicators. Please note that even and odd numbered pins are on
opposite sides of each header.
All JF2 wires have been bundled into single ribbon cable to simplify their
connection. Make sure the red wire plugs into pin 1 as marked on the
serverboard. The other end connects to the Control Panel printed circuit
board, located just behind the system status LEDs in the chassis.
See the Connector Definitions section in this chapter for details and pin
descriptions of JF2.