Supermicro SUPERSERVER 6013P-8 Plus, User Manual, Page: 30 / 108

3-2
S
UPER
S
ERVER 6013P-8+ User's Manual
3-3 Control Panel LEDs
The control panel located on the front of th SC813S chassis has five LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and
any corrective action you may need to take.
!
OVERHEAT: Indicates an overheat condition in the chassis. This may
be caused by cables obstructing the airflow in the system, or the ambient
room temperature being too warm. You should also check to make sure
that the chassis cover is installed and that all fans are present and operat-
ing normally. Finally, check the air seals for damage. The air seals are
located under the blower fan and beneath the frame cross section that
separates the drive bay area from the motherboard area of the chassis.
!
NIC2: Indicates network activity on GLAN2 when flashing .
!
NIC1: Indicates network activity on GLAN1 when flashing.
!
HDD: Indicates IDE channel activity. On the SuperServer 6013P-8+ this
light indicates SCSI and CD-ROM drive activity when flashing.
NIC2
NIC1