78
Chapter 6: Optional Components
Chapter 6
Optional Components
This chapter describes alternate configurations and optional system components.
Optional Parts
Storage drive options
Power options
Cable Management Arm
TPM security module
Intel
6.1 Storage Protocols Supported
The storage drive bays can support SATA, SAS, and NVMe in any combination. To enable
SAS and NVMe, additional hardware is required. Once the supporting hardware is installed
for a selection of bays, drives of any storage protocol type can be inserted.
SATA
– The default configuration supports up to twelve SATA drives.
SAS
– An add-on controller card and cables can support up to twelve SAS drives.
NVMe
– The motherboard supports up to ten NVMe drives. The Ultra Riser card supports
two more. Additional cables are required.
6.2 Power Supply Modules
Power Supply Module Options
Watts
Part Number
80Plus Level
1200
PWS-1K22A-1R (optional)
Titanium
1300
PWS-1K30F-1R (default DC
PWS)
-
2000
PWS-2K08F-1R (default)
Titanium
