SuperServer 2029GP-TR User's Manual
24
Note:
Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Figure 2-5. Installing the System into the Rack
Sliding the Chassis onto the Rack Rails
Warning:
Mounting the system into the rack requires at least two people to support the chassis
during installation. Please follow safety recommendations printed on the rails.
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides. When
the chassis has been pushed completely into the rack, it should click into the locked
position.
4. Optional screws may be used to hold the front of the chassis to the rack.
Ball-Bearing
Shuttle
