SuperServer 1029U-TN10RT User's Manual
50
Figure 3-12. Installing the Air Shroud
Installing the Air Shroud
Air shrouds concentrate airflow to maximize fan efficiency. The serverboard air shroud does
not require screws to install.
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated below.
2. Align the notch on the air shroud with the pin on the expansion card bracket.
3. Slide the pin into the back of the notch.
4. Lower the front of the air shroud over the fan tray, sliding the front notches over the pins
on the fan tray.
Shrouds
